Skyjacker SOFTRIDE SPRG 2in. FRT 55 CJ BHNG J32FS

Call us today to order your Skyjacker SOFTRIDE SPRG 2in. FRT 55 CJ!

Part # J32FS

Constructed As Progressive Multileaf Packs

Limited Lifetime Warranty

Load Capacity Will Be Equal or Greater Than OE

Made With American Steel

Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Vehicle information below is not a guaranty of fitment. If you have fitment concerns, please call prior to ordering.

1959-1975 Jeep CJ5; 1959-1975 Jeep CJ6; 1955-1958 Jeep Willys CJ-5; 1956-1958 Jeep Willys CJ-6

We are an authorized retailer for all Skyjacker products. The standard manufacturer warranty applies. If you ever have manufacturer warranty concerns or questions on products you purchased from us, we can help! We are a family owned and operated company that values all of our customers. We are here to assist with all future warranty concerns!