Call us today to order your Skyjacker ADX 2.0 Dual Stabilizer Kit With CNC Machined 6061-T6 Polished Aluminum Hard Anodized Cylinders, Main Bracket, Tie Rod Brackets, and Hardware.!
Part # 2266
30mm Bore / 14mm Piston Rod
Aluminum Body Dissipates Heat Up to 30% Faster Than Steel Body.
CNC Machined 6061-T6 Polished Aluminum Hard Anodized.
Decreases Tire, Tie Rod and Ball Joint Wear and Tear.
Delivers a Quicker Response to Terrain and Improved Handling.
Equal Compression / Extension Damping Performance.
For Stock and Lifted Bronco 4WD.
Gain a More Controlled Handling Feel On and Off-Road.
Internal High Performance Fade Resistant Gas Cell.
No Lift Required. Easy DIY Bolt-on Installation.
Restrains Bump Steer. Reduces Steering Wheel Shimmy.
Specific Valving to Improve Control and Handling.
The Ford Bronco has a tendency to have bump steer (especially when adding heavier, larger, wider tires and wheel combinations). That steering wheel kick / steering wheel shimmy you feel is bump steer (up thrust bumps, nosedive dips, rolling ruts and side-to-side kicks from the terrain). Skyjacker steering stabilizers are dampening shocks for your steering system. They dampen out the harshness of the highway and place control back into the driver's hands. Controlling the terrain helps reduce the physical fatigue of fighting the road. Improves steering response time and allows you to enjoy the drive. CNC machined 6061-T6 polished aluminum hard anodized body cylinder ADX 2.0 stabilizers with 30mm bore & 14mm piston rod provide specific valving needed with equal compression and extension damping performance. The dampening control also adds life to tires, tie rod, ball joints and other steering components. CNC machined 6061-T6 polished aluminum hard anodized body and caps for superior rust resistance. CNC machined 6061-T6 polished aluminum hard anodized body dissipates heat up to 30% faster than traditional steel body steering stabilizers. Internal high performance fade resistant gas cell yields longer life, improves handling, & performance. Compatible with stock to 7 in. lift heights. Includes two (2) steering stabilizers, mounting brackets and required hardware. Easy DIY bolt-on installation.
Vehicle information below is not a guaranty of fitment. If you have fitment concerns, please call prior to ordering.
1966-1977 Ford Bronco
We are an authorized retailer for all Skyjacker products. The standard manufacturer warranty applies. If you ever have manufacturer warranty concerns or questions on products you purchased from us, we can help! We are a family owned and operated company that values all of our customers. We are here to assist with all future warranty concerns!
Warning: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
