The Ford Super Duty has a tendency to have bump steer (especially when adding heavier, larger, wider tires and wheel combinations). That steering wheel kick\steering wheel shimmy you feel is bump steer (up thrust bumps, nosedive dips, rolling ruts and side-to-side kicks from the terrain).
Skyjacker steering stabilizers are dampening shocks for your steering system. They dampen out the harshness of the highway and place control back into the driver's hands. Controlling the terrain helps reduce the physical fatigue of fighting the road. Improves steering response time and allows you to enjoy the drive.
Maintain your OEM steering stabilizer and add this heavy-duty dual inline stabilizer upgrade to your F250 Super Duty\F350 Super Duty Super Duty 4x4 to maximum steering dampening. White body twin-tube cylinder H7000 stabilizers provide specific valving needed with equal compression and extension damping performance. The dampening control also adds life to tires, tie rod, ball joints and other steering components.
Positions dual steering stabilizers up and out of harm's way. Stock to 8.5 inch lift heights can install with supplied studs mounts pointing down. More ground clearance is available with studs mounts pointing up on 4 inch-8.5 inch lifts.
Compatible with stock, leveled and lifted Super Duty 4WD trucks. Includes two (2) steering stabilizers, mounting brackets and required hardware. Easy DIY bolt-on installation.
Features:
- 7000 Dual Steering Stabilizer Kit With White Cylinders and Red Boots 2005-2023 Ford F250/F350 Super Duty
- For Stock, Leveled and Lifted Super Duty 4WD Trucks.
- Specific Valving to Improve Control and Handling.
- Equal Compression\Extension Damping Performance.
- Gain a More Controlled Handling Feel On and Off-Road.
- Delivers a Quicker Response to Terrain and Improved Handling.
- Restrains Bump Steer. Reduces Steering Wheel Shimmy.
- Decreases Tire, Tie Rod and Ball Joint Wear and Tear.
- Improves Steering Response Time.
- Enjoy a More Confident, Controlled Driving Experience.
- Visible Upgrade. Aggressive Look. Impressive Performance.
- Works with OEM Wheels with OEM Backspacing.
- No Lift Required. Easy DIY Bolt-on Installation.
Fit Notes:
- Fits Lift Heights 0-8.5 Inches.
- Does Not Fit Models Equipped with 1-3/4 Inch Tie Rod.
Vehicle information below is not a guaranty of fitment. If you have fitment concerns, please call prior to ordering.
We are an authorized retailer for all Skyjacker products. If you ever have manufacturer warranty concerns or questions on products you purchased from us, we can help! We are a family owned & operated company that values all of our customers, we are here to assist with all future warranty concerns!
Warning: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
