Multiply: Because one output just isn't enough! If you've got an RGB setup that requires more outputs from the same controller: these splitters are a life saver! Two Styles: These come available for old school "RGB" connectors, and the industry-standard JST connectors. Make sure you select the right one for your gear! Plug n Play: With these convenient splitters, there should be no need to cut/splice any of the small wiring associated with your RGB products. They are designed to be plug n play with various RGB accessories, and virtually everything sold by LEDC. Power: Beware that by splitting the outputs of your RGB Controller, you will be dividing the amount of power it's capable of providing amongst more accessories. What that means? If you're running too much gear off the same controller: you may experience some flickering. Solution: You just need another controller and there's no way around it.
- WIRE THICKNESS: 18AWG
- LENGTH: Approx. 8in / 200mm
- INSULATION: Braided TechFlex
- Max Load: 10A @ 12V DC
Vehicle information below is not a guaranty of fitment. If you have fitment concerns, please call prior to ordering.
Manufacturer's 2 Year Warranty On Factory Defects From The Original Order Date. - We are an authorized retailer for all Morimoto products. If you ever have manufacturer warranty concerns or questions on products you purchased from us, we can help! We are a family owned & operated company that values all of our customers, we are here to assist with all future warranty concerns!
Warning: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
