Fabtech K1046 6" Radius Arm Lift System For GMC Sierra 2500 HD

Fabtech K1046 6" Radius Arm Lift System For GMC Sierra 2500 HD

We offer FREE shipping and some of the BEST pricing for sale online on all Fabtech products, call us today to order yours!

w/Performance Shocks; 6 in. Lift

Fabtech's cutting edge RTS(TM) system has now been developed for the all new GM HD platform. The 6" RTS(TM) utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when off-roading.. The 6" RTS(TM) system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point. High arched crossmembers and front differential skid plate are constructed of 1/4" thick steel to resist bending from hard front suspension impacts. Only 1/4" thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6" RTS(TM) system allows the use of both 18" and 20" diameter wheels.

Fabtech K1046 Fitment Data Includes But May Not Be Limited To The Following Vehicles (If you have fitment questions or concerns, please contact us prior to ordering): 2011-2011 GMC Sierra 2500 HD